Won't drain, won't spin, or leaking from the base. Most calls trace back to a handful of common parts, checked in order before anything is replaced.
If your washer is doing any of this, it's usually one of a handful of common causes, not a sign it's time to replace it.
Washer won't spin, drum just fills and drains
Often a lid or door switch that isn't sensing the latch properly, which stops the machine from ever reaching the spin stage.
Drum shaking or walking during spin
Worn suspension springs or shock absorbers are the most common cause, especially on front-load models after several years of regular use.
Washer leaking from the bottom during the cycle
Usually a failed door boot seal on front-load models, which lets water escape around the door during agitation.
Washer won't fill with water
Often an inlet valve stuck closed or a kinked supply hose, both of which stop water from reaching the tub.
Loud banging or clunking during spin
A worn drum bearing is the usual suspect, and it tends to get louder over several cycles rather than appearing suddenly.
Washer stopping mid-cycle with an error code
Usually a pressure sensor misreading the water level, which makes the control board think something's wrong when it isn't.
A recent repair
Washer stopping mid-spin, Burke Mountain
A front-load washer kept stopping partway through the spin cycle, leaving clothes soaked. The door switch was reading as unlatched even when closed properly. Replaced the switch and ran a full cycle to confirm it completed normally, with a 90-day warranty applied to the repair.
Genuine parts and technicians who know each platform, not just the basics.
Real washer repairs, from quick fixes to the ones nobody else could figure out.
Washer had developed a violent thumping on every spin cycle, loud enough to hear from upstairs. Both suspension springs had given out and needed replacing together. Completely silent now.
Washer kept stopping mid-cycle with an error code. Pressure sensor was misreading the water level, sorted in one visit.
Front-load washer leaking a little water onto the floor after every load. Door boot seal had worn through, replaced and tested twice to be sure.
Fair diagnosis on the washer, didn't try to sell us a new machine. Four stars only because the part took a couple of days.
Washer wouldn't fill at all one morning. Inlet valve was stuck closed, quick fix once he got here.
We're in Maillardville and weren't sure how fast anyone would come. Same-day appointment, no issue at all.
Washer drum wouldn't spin, just filled and drained over and over. Lid switch wasn't sensing properly, five minute fix.
Loud clunking noise every spin cycle for weeks. Drum bearing had worn out, replaced and it runs smooth now.
Booked online late at night. Got a call the next morning and the washer was running again before I left for work.
Old washer from the previous owners, assumed it needed replacing. He fixed the door seal instead and it works great.
Solid repair, reasonable price. Only reason it's four stars is the appointment window ran a bit long.
Near City Centre and he showed up right on time, knew the model without needing to look anything up.
We'll call you back fast
Tell us what's going on and we'll get back to you shortly.
Thank You!
Your message has been sent successfully. We'll get back to you shortly.
Thank You!
Your message has been sent successfully. We'll get back to you shortly.
From City Centre to the hillside neighbourhoods, we send a technician the same day you call, most of the time.
